Richi Biomass Machine

What is the prospect of the biomass pellet mill?

A biomass pellet mill for sale is a kind of biomass energy pre-treatment equipment. Bio-fuels are made of solid wastes such as corn stalks, wheat straw, rice straw, peanut shells, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust and bark of crops as raw materials, which are crushed, pressurized, densified and shaped into small stick-shaped solid particle fuels.

Granular fuel is made by extruding wood chips, straws and other raw materials with a pressure roller and ring die under normal temperature. The density of raw materials is generally about 0.6-0.8, and the particle density after molding is greater than 1.1, which is very convenient for transportation and storage. At the same time, its combustion performance is greatly improved, reducing human dependence on petrochemical energy and atmospheric emissions. Formed granular fuel is a new type of bio-energy, which can replace firewood, raw coal, fuel oil, liquefied gas, etc, and is widely used in heating, domestic stoves, hot water boilers, industrial boilers, biomass power plants, etc.

In recent years, with the increasing efforts of global air pollution control and environmental protection, the government has intensively introduced relevant biomass energy support policies. Promote the development of biomass energy, especially the application of biomass raw materials processed into particles to replace coal combustion. With the vigorous development of the biomass pellet industry, the biomass pellet mill industry, as the upstream industry of particle processing, has also grown rapidly, and once there was a situation of short supply.

biomass pellet mill

Biomass pellet mill is also called biomass pellet machine, biomass pellet making machine, biomass granulator, etc. The raw materials of its particulate fuel are mainly agricultural and forestry wastes, including straw, sawdust, etc. Compared with coal, biomass fuel pellet has many advantages. The specific analysis is as follows:

  1. Good environmental benefits

The raw materials of biomass particles almost all come from crop wastes and waste wood. If these wastes can not be effectively recycled but are directly burned, their combustion is not sufficient, which not only wastes resources but also pollutes the environment. The above problems can be effectively avoided by using biomass particles for power generation. And reduce the pollution caused by traditional coal-burning fossil fuels. At the same time, the combustion products can be directly used for composting without waste.

  • Excellent product performance

Through the adjustment of the preparation process, the obtained biomass particles have a tight structure and will not be broken during transportation. At the same time, it burns more fully and is not easy to slag and coking. Compared with the previous biomass particles, they can release more heat and avoid adverse effects on boilers and other equipment.

  • Significant economic benefits

The production of biomass particles has small investments and high economic benefits. On the one hand, the processing and production equipment are conventional hammer mills, biomass pellet mills, dryers and other equipment, and the overall investment is small.

  • Huge market prospect

Biomass power generation is the most effective way for rural biomass. In the past few years, biomass power plants have been built one after another. Biomass particles are the main raw materials for biomass power generation, which will inevitably be in great demand in the future market.

How to select biomass pellet plant equipment? First of all, we need to understand the production process of biomass particles. Different types of raw materials require different equipment. For example, the equipment used for round wood and sawdust is different. The round wood needs to be roughly broken and then dried with fine powder for granulation, which requires the purchase of hammer mill, drum drying machine, biomass pellet mill for sale, cooling machine, screening machine, packaging machine, etc. If the moisture of raw materials is suitable, they can be directly granulated after cleaning. In a word, the size and moisture content of raw materials are decisive factors. Secondly, the output shall be determined, and the equipment selection shall be determined according to the output requirements. The greater the output of the equipment, the higher the price.

The professional machinery and equipment for making biomass granules are called biomass pellet mills, which can process all kinds of combustible biomass raw materials without adding any additives to produce biomass granular fuel.

Biomass pellet is a new clean fuel. Renewable energy plays an important role in the whole energy system. Especially in the current situation where coal burning is prohibited and power consumption is restricted, the biomass particle industry has a very considerable development prospect.

The development of biomass pellet fuel originated from the energy shortage period in the United States in the 1970s. At that time, the raw materials mainly came from the wood waste of furniture, paper making and other factories, and the energy generated was used to replace electric energy, carbon fuel, fossil fuel, etc.

In recent years, there are many enterprises doing biomass pellet mill, but few enterprises have independent research and development capabilities. Most enterprises have no new product development capability or production technology. Since the biomass pellet making machine has basically achieved full automation, RICHI Machinery has also entered a stage of evolution in technological innovation.

A biomass pellet mill is a kind of environmental protection machinery and equipment, so there will be great requirements on energy conservation and environmental protection, and there may be clear numerical provisions on energy consumption and noise. The biomass granulator produced by RICHI Machinery completely conforms to the national environmental protection machinery standards. Moreover, through continuous improvement and innovation, many cumbersome processes have been removed, and comprehensive automation has really been realized.

biomass pellet mill for sale

Raw materials standards for biomass pellet mill?

The biomass pellet mill has standard requirements for raw materials in the production process. Too fine raw materials will cause the biomass pellet forming rate to be low and more powdery. The quality of the formed pellets made by biomass pellet mill also affects the production efficiency and power consumption.

Generally speaking, raw materials with small pellet size are easy to compress, and raw materials with large pellet size are more difficult to compress. In addition, the water resistance, hygroscopicity and molding density of the raw materials are closely related to the size of the fuel pellets made by biomass pellet mill.

When the same material with different pellet sizes is at low pressure, the larger the pellet size of the material, the slower the molding density changes, but as the pressure increases, the difference becomes less obvious when the pressure reaches a certain value.

Pellets with a small pellet size have a large specific surface area, and wood chips are easy to absorb moisture and regain moisture; on the contrary, because the pellet size of the pellets becomes smaller, the gaps between pellets are easily filled, and the compressibility becomes larger, which makes the residual internal content inside the biomass pellets. The stress becomes smaller, thereby weakening the hydrophilicity of the formed block and improving the water resistance.

RICHI focuses on biomass pellet mill for sale, also focuses on technical innovation and sustainable development all the time. It ranks as one of domestic leading manufacturers in research & development capability, manufacturing capability and product quality.

1. What are the standards for biomass raw materials?

What are the standards for raw materials in the production of biomass pellet mill? Of course, there must be a small limit to the small size. If the pellet size of the wood chips is too small, the mutual inlaying and matching ability of the wood chips will be reduced, resulting in poor molding or reduced resistance to breaking. Therefore, it is better not to be less than 1mm.

The size should not exceed the limit. When the pellet size of the wood chips is greater than 5MM, it will increase the friction between the pressing roller and the abrasive tool, increase the extrusion friction of the biomass fuel pellet machine, and waste unnecessary energy consumption.

Therefore, the production of biomass pellet mill generally requires that the pellet size of the raw material be controlled between 1-5mm.

2. Pellet fuel from biomass pellet mill

biomass pellet mill for sale

Biomass pellet fuel is a kind of renewable new energy, which utilizes plant wastes, such as sawdust, branches and sapwood, corn stover, rice straw and rice husk, and is made into pellets through the biomass pellet mill and biomass pellet production line.

Pellets made by biomass pellets making machine are fuels for direct combustion, which can indirectly replace coal, oil, electricity, natural gas and other energy sources.

Combustion heat loss (Q4) is basically zero, coal fired furnace Q4 is 7-15%, and our ST is 0.41 with a large amount of coal, the difference in SO2 emissions after combustion is 20.5 times. Therefore, in addition to alternative fuels such as coal and oil, biomass pellet fuel can reduce air pollution, make SO2 and CO2 harmful gases, and achieve essentially zero emissions.

Biomass pellet fuel made by biomass pellet mill mainly comes from wood processing, forest pruning and other wastes and crop straw, raw material sources are wide, China is rich in resources, easy to invest in production, it is cheaper than coal and has higher thermal efficiency.

Pellet fuel is in line with my country’s industrial policy and our province’s overall plan for energy conservation and emission reduction. At the same time, waste recycling can increase farmers’ income and employment, add new fuel to the countryside, and improve farmers’ quality of life.

The biomass pellet fuel processed by the biomass fuel pellet machine also has good combustion performance similar to briquette, and has the advantages of less sulfur content, less ash content and lighter environmental pollution than coal.

Compared with firewood, biomass pellet fuel has low water content, high specific gravity and high calorific value, which is beneficial to improve the thermal efficiency of biomass pellet fuel furnace. Therefore, biomass pellet fuel is widely used in biomass straw power plants, boilers of enterprises and institutions, biomass straw gasification stations, household stoves, European heating furnaces, etc., thereby replacing coal and solving environmental pollution problems.

Biomass pellet fuel made by biomass pellet mill machine can be used in textile, printing and dyeing, paper, food, rubber, plastic, chemical, pharmaceutical and other industrial products, and can be used for heating, bathing, air conditioning and daily heating in enterprises, institutions, hotels, schools, restaurants, and service industries. water.

Compared with other production methods, biomass pellet mill has the characteristics of simple production process, simple equipment, simple operation, easy to realize industrial production and large-scale use.

Effective development and utilization of solidified crop straws can replace raw coal to effectively alleviate energy shortages, control organic waste pollution, protect the ecological environment, and promote harmony between man and nature.

According to statistics, burning 10,000 tons of wood pellets as an environmentally friendly fuel can replace 8,000 tons of traditional coal, and the price ratio is indeed 1:2. Assuming that the traditional coal is converted into environmentally friendly fuel wood pellets every year, the price of using 10,000 tons of pellets will save 1.6 million yuan per year compared to coal and 1.9 million yuan compared to natural gas.

At present, many areas still use natural gas, coal, etc., where the use of boilers requires thermal energy, the use of wood pellets, an environmentally friendly and low-cost fuel, can be promoted.

Wood pellets made by biomass granulator mainly use agricultural and forestry wastes such as straw, rice husks, straw, cotton stalks, husks, branches, and sawdust as raw materials, which are processed into shaped pellet fuels and applied in various industries.

The function of biomass pellets has also been improved. It will expand the larger development and application fields, and promote the biomass pellet mill to have more development space.

Richi Machinery is an equipment manufacturer specializing in the biomass pellet mills for sale

If you want to know more about wood biomass pellet mill for sale Brazil, hot sale 2 ton per hour biomass pellet mill for sale Romania, double layer biomass pellet mill for sale South Korea, ring die sawdust biomass pellet mill for sale Poland, high performance 160 kw biomass pellet mill for sale USA, biomass pellet mill for sale Austria, biomass pellet mill for sale Australia, please contact Richi Machinery for details.