Richi Biomass Machine

What is the prospect of the biomass pellet mill?

A biomass pellet mill for sale is a kind of biomass energy pre-treatment equipment. Bio-fuels are made of solid wastes such as corn stalks, wheat straw, rice straw, peanut shells, corn cobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust and bark of crops as raw materials, which are crushed, pressurized, densified and shaped into small stick-shaped solid particle fuels.

Granular fuel is made by extruding wood chips, straws and other raw materials with a pressure roller and ring die under normal temperature. The density of raw materials is generally about 0.6-0.8, and the particle density after molding is greater than 1.1, which is very convenient for transportation and storage. At the same time, its combustion performance is greatly improved, reducing human dependence on petrochemical energy and atmospheric emissions. Formed granular fuel is a new type of bio-energy, which can replace firewood, raw coal, fuel oil, liquefied gas, etc, and is widely used in heating, domestic stoves, hot water boilers, industrial boilers, biomass power plants, etc.

In recent years, with the increasing efforts of global air pollution control and environmental protection, the government has intensively introduced relevant biomass energy support policies. Promote the development of biomass energy, especially the application of biomass raw materials processed into particles to replace coal combustion. With the vigorous development of the biomass pellet industry, the biomass pellet mill industry, as the upstream industry of particle processing, has also grown rapidly, and once there was a situation of short supply.

Biomass pellet mill is also called biomass pellet machine, biomass pellet making machine, biomass granulator, etc. The raw materials of its particulate fuel are mainly agricultural and forestry wastes, including straw, sawdust, etc. Compared with coal, biomass fuel pellet has many advantages. The specific analysis is as follows:

  1. Good environmental benefits

The raw materials of biomass particles almost all come from crop wastes and waste wood. If these wastes can not be effectively recycled but are directly burned, their combustion is not sufficient, which not only wastes resources but also pollutes the environment. The above problems can be effectively avoided by using biomass particles for power generation. And reduce the pollution caused by traditional coal-burning fossil fuels. At the same time, the combustion products can be directly used for composting without waste.

  • Excellent product performance

Through the adjustment of the preparation process, the obtained biomass particles have a tight structure and will not be broken during transportation. At the same time, it burns more fully and is not easy to slag and coking. Compared with the previous biomass particles, they can release more heat and avoid adverse effects on boilers and other equipment.

  • Significant economic benefits

The production of biomass particles has small investments and high economic benefits. On the one hand, the processing and production equipment are conventional hammer mills, biomass pellet mills, dryers and other equipment, and the overall investment is small.

  • Huge market prospect

Biomass power generation is the most effective way for rural biomass. In the past few years, biomass power plants have been built one after another. Biomass particles are the main raw materials for biomass power generation, which will inevitably be in great demand in the future market.

How to select biomass pellet plant equipment? First of all, we need to understand the production process of biomass particles. Different types of raw materials require different equipment. For example, the equipment used for round wood and sawdust is different. The round wood needs to be roughly broken and then dried with fine powder for granulation, which requires the purchase of hammer mill, drum drying machine, biomass pellet mill for sale, cooling machine, screening machine, packaging machine, etc. If the moisture of raw materials is suitable, they can be directly granulated after cleaning. In a word, the size and moisture content of raw materials are decisive factors. Secondly, the output shall be determined, and the equipment selection shall be determined according to the output requirements. The greater the output of the equipment, the higher the price.

The professional machinery and equipment for making biomass granules are called biomass pellet mills, which can process all kinds of combustible biomass raw materials without adding any additives to produce biomass granular fuel.

Biomass pellet is a new clean fuel. Renewable energy plays an important role in the whole energy system. Especially in the current situation where coal burning is prohibited and power consumption is restricted, the biomass particle industry has a very considerable development prospect.

The development of biomass pellet fuel originated from the energy shortage period in the United States in the 1970s. At that time, the raw materials mainly came from the wood waste of furniture, paper making and other factories, and the energy generated was used to replace electric energy, carbon fuel, fossil fuel, etc.

In recent years, there are many enterprises doing biomass pellet mill, but few enterprises have independent research and development capabilities. Most enterprises have no new product development capability or production technology. Since the biomass pellet making machine has basically achieved full automation, RICHI Machinery has also entered a stage of evolution in technological innovation.

A biomass pellet mill is a kind of environmental protection machinery and equipment, so there will be great requirements on energy conservation and environmental protection, and there may be clear numerical provisions on energy consumption and noise. The biomass granulator produced by RICHI Machinery completely conforms to the national environmental protection machinery standards. Moreover, through continuous improvement and innovation, many cumbersome processes have been removed, and comprehensive automation has really been realized.


Recent Posts

What Are Some Usual Challenges Associated With Fish Feed Extrusion?

Fish feed extrusion is an intricate  procedure that  calls for careful  focus to detail in order to  generate  top notch, nutritionally  total feed for fish and other  marine  pets. While the benefits of fish feed extrusion are numerous, there are  likewise several common challenges that can emerge throughout the process. In this essay, we  will certainly  discover some of the most  usual obstacles connected with fish feed extrusion as well as review techniques for resolving them. One of the most  considerable difficulties in fish feed extrusion is keeping uniformity in the final product. This can be a certain concern when collaborating with active ingredients that have various physical residential or commercial properties, such as varying levels of wetness or fat content. In order to produce consistent pellets or other shapes, the extrusion process have to be very carefully calibrated to make sure that all active ingredients are combined and refined uniformly. This may require modifications to the temperature, pressure,  and also various other variables in the extruder,  along with mindful surveillance of the feed as it moves  via the extrusion procedure.  One more  difficulty in fish feed extrusion is making certain that the feed is nutritionally  full  as well as balanced. This can be difficult to achieve, as different species of fish and  various other water animals have  differing  dietary  needs.  Additionally, the  dietary content of the feed can be impacted by aspects such as heat damage and  handling time, which can cause some nutrients to break down or come to be much less  offered for absorption. To address these challenges, manufacturers  have to carefully select as well as formulate ingredients to guarantee that the feed satisfies the  dietary needs of the target types,  in addition to carefully keep an eye on the extrusion procedure to reduce vitamins and mineral losses. A third challenge in fish feed extrusion is making certain that the feed is palatable and appealing to the fish. This can be a certain  worry when working with certain  kinds of components, such as plant-based proteins, which may not be as attracting the fish as animal-based components. To address this challenge,  makers may integrate attractants or flavor enhancers right into the feed,  along with  trying out different solutions and handling techniques to enhance the overall palatability of the product. Related post: Floating Fish Pellet Machine For Sale  Ultimately, fish feed extrusion can be a capital-intensive procedure,  needing considerable  financial investment in  tools and also infrastructure. This can be a  obstacle to entrance for smaller sized producers or those running in  areas with restricted access to  resources. In addition, the ongoing prices related to repair and maintenance of the extruder can be significant. To attend to these difficulties,  suppliers might seek out partnerships or partnerships with various other producers,  along with check out alternative  funding options such as grants or lendings. In conclusion, fish feed extrusion is a  intricate process that presents a  variety of challenges for producers. From guaranteeing  uniformity  as well as dietary  equilibrium to boosting palatability  and also handling  prices,  manufacturers  need to be prepared to  resolve a range of issues in order to produce top notch, nutritionally total feed for fish  as well as  various other marine pets. By  very carefully  keeping track of  and also regulating the extrusion process, as well as  try out different  solutions  as well as  methods,  suppliers can overcome these challenges as well as  generate feed that fulfills the needs of their target varieties. (Follow…

What Are The Different Types Of Sinking Fish Feed Pellet Mills?

There are several types of sinking fish feed pellet mills, each designed for specific production…

How Does The Shrimp Feed Pellet Machine Improve The Quality Of Shrimp Feed?

Shrimp feed pellet equipments are particularly made to produce high-grade shrimp feed pellets that contain…

What Are The Factors To Consider When Selecting Fish Feed Machine For Commercial Use?

Selecting a fish feed machine for commercial use requires careful consideration of several factors, including:…

How To Look After Fish Fry?

1. Reasonable Stocking Of Fry Breeding large-sized fry in autumn is a bottom line of…

How To Mix Chicken Feed For Layers?

With feed rates increasing rapidly recently, homemade chicken feed can not only minimize the expense…